There is hardly a person in the world that hasn’t gone through their wardrobe and discovered that one favorite shirt of theirs from their younger days. And then the moment is ruined upon the discovery of a fuzzy substance on the shirt. If you found this shirt in the back of your closet, then you should go wash your hands, because the shirt has been infected with mold and touching mold spores with your bare hands can be very hazardous for your health. There are several medical problems that could arise from contact with mold. Some of these problems are skin rashes, allergic reactions, runny noses, and the like.
If you do have articles of clothing which contain mold, don’t worry because most molded clothing can be cleaned as good as new. However, the mold can end up leaving stains. Bleach can be a very effective form of mold removal. However, this usually works best when cleaning white clothing. Other effective cleaning methods include using a scrub brush, which can remove a good deal of the mold and then place a pre-wash spray on it. Allow this spray to soak for roughly forty five minutes and then put it into the washing machine. It is very important that you allow these clothes to dry naturally in the sun. If you were to use some artificial source of heat, then the stain could set in even deeper in the fabric, and the sun can help further the bleaching process white clothing.
While regular clothing is easy to have mold removed from, you may have no such luck with genuine leather or cowhide. These types of items are easily susceptible to being discolored beyond repair. Most of these items are incapable of being restored, and they are probably better left in the garbage.
However, upholstery and curtains that have come in contact with mold can be cleaned using the same aforementioned methods as described above. It is important that you also purchase a vacuum cleaner that has a HEPA filter in it in order to accommodate a mold free home. If you use this vacuum and its brush attachments to gather up all of the mold and its consequential spores, the filter will prevent these spores from being re-released. This will prevent from having to repeat this process or, perhaps even worse, have to throw out more clothing.
Jim Corkern is a writer and promoter of quality
New Jersey mold damage restoration and other states and cities such as
Connecticut mold remediation companies across the united states.
Thursday, September 27, 2007
Mold and your Citrus Crops
Anyone who works with citrus crops knows that they can take a very long time to grow and cultivate. But, perhaps even more frustrating than waiting on the crops to have to grow and ripen are the various molds and fungi that could afflict the crops. The two most prominent molds that affect a citrus crop post-harvest are blue mold, and green mold. These two are caused by the single mold Penicillium digitatum. All citrus fruit growing regions have this mold and it is most certainly a serious threat to the crops.
Citrus fruit is made into an easy target for mold by way of being bruised or by being punctured while it is being packed or harvested. The mold is attracted to the juice that comes out of the damaged fruit on account of the fact that mold likes to grow in wet and humid environments. And since most citrus is grown in temperate zones, there is no lack of these two qualities. If the fruit is in, say, a large shipping truck with a lot of other fruits, the mold could spread far into the shipment and cause a good portion of it to be riddled with mold infection. And if the mold makes to the grocery store and the mold, by some miracle, goes unnoticed it could affect other items in the store. If the fruit is left on the tree and mold has spread to it then other fruit on the tree could be affected and the crop could be rendered useless.
The only actual difference between blue mold and green mold is color. There are virtually no differences in the effects the two molds have on fruit. The two molds also have very similar growing environments and necessities and have basically the same needs. They must both grow in a temperature of around seventy five degrees Fahrenheit. Raising or lowering the temperature can slow the growth of these molds. As such, freezing the citrus fruits can stop the molds growth before any serious damage can be done. This is why most shipment trucks are equipped with a freezer, but many still do not have this feature. Taking extra care of the citrus fruits is another way to prevent the spread of mold. Caring for the fruit helps to ensure that there is no puncturing or bruising. Fungicides are also a very popular, and a highly recommended, way of dealing with mold.
Jim Corkern is a writer and promoter of quality
flood water damage restoration chicago and other states such as
South Carolina mold remediation companies across the united states.
Citrus fruit is made into an easy target for mold by way of being bruised or by being punctured while it is being packed or harvested. The mold is attracted to the juice that comes out of the damaged fruit on account of the fact that mold likes to grow in wet and humid environments. And since most citrus is grown in temperate zones, there is no lack of these two qualities. If the fruit is in, say, a large shipping truck with a lot of other fruits, the mold could spread far into the shipment and cause a good portion of it to be riddled with mold infection. And if the mold makes to the grocery store and the mold, by some miracle, goes unnoticed it could affect other items in the store. If the fruit is left on the tree and mold has spread to it then other fruit on the tree could be affected and the crop could be rendered useless.
The only actual difference between blue mold and green mold is color. There are virtually no differences in the effects the two molds have on fruit. The two molds also have very similar growing environments and necessities and have basically the same needs. They must both grow in a temperature of around seventy five degrees Fahrenheit. Raising or lowering the temperature can slow the growth of these molds. As such, freezing the citrus fruits can stop the molds growth before any serious damage can be done. This is why most shipment trucks are equipped with a freezer, but many still do not have this feature. Taking extra care of the citrus fruits is another way to prevent the spread of mold. Caring for the fruit helps to ensure that there is no puncturing or bruising. Fungicides are also a very popular, and a highly recommended, way of dealing with mold.
Jim Corkern is a writer and promoter of quality
flood water damage restoration chicago and other states such as
South Carolina mold remediation companies across the united states.
Hurricanes and Water Safety
If there is a hurricane heading to your area, then it is most important that you make preparations, incase you decide to simply wait the hurricane out. Arguably the most important thing that you can do is to make sure that you have a sizeable bottled water supply in your home. It is important that you make sure that the water supply is proportionate to the number of people dwelling at your house, as there must be enough water for the duration of the storm. It is critical that you have clean drinking water during the storm. The water from the sea and sewer system may have affected the water in your tap, so you should never assume that the water coming out of your faucet is clean. You should not drink anything but bottled water during a hurricane. This contaminated water could sicken your family or guests and even cause death in the worst case. You should make sure that there is at least one gallon of water for one person to drink a day. Water purification tablets and chlorinated bleach come highly recommended, as they can be used to clean water in most situations. It is important that you let the treated water set for at least 30 minutes before you drink it.
It is important that you, under no circumstances whatsoever, do not drink water that may be contaminated. Damage to your body caused by contaminated water is devastating and if you have drank any contaminated water and are afflicted with the symptoms of it, it is very unlikely that you will be able to make it to a hospital during the hurricane and death could very well result. If you receive any cuts or wounds, do not try and wash it off with faucet water. This could make the contamination’s job that much easier. You should instead wash the cut or cuts with soap and chlorine bleach treated water. This will help keep serious harm from happening.
You should at no point allow children to play in flood waters, no matter how hot it may get in your building. If there are toys that have come into contact with water that you so much as suspect as being contaminated, you should have the toys disinfected before allowing the children to play with them again. You should also board up your windows and doors with plywood, as it keeps glass from being blown into your home and causing cuts.
Jim Corkern is a writer and promoter of quality
flood water damage restoration chicago and other states such as
New Jersey mold remediation contractor companies across the united states.
It is important that you, under no circumstances whatsoever, do not drink water that may be contaminated. Damage to your body caused by contaminated water is devastating and if you have drank any contaminated water and are afflicted with the symptoms of it, it is very unlikely that you will be able to make it to a hospital during the hurricane and death could very well result. If you receive any cuts or wounds, do not try and wash it off with faucet water. This could make the contamination’s job that much easier. You should instead wash the cut or cuts with soap and chlorine bleach treated water. This will help keep serious harm from happening.
You should at no point allow children to play in flood waters, no matter how hot it may get in your building. If there are toys that have come into contact with water that you so much as suspect as being contaminated, you should have the toys disinfected before allowing the children to play with them again. You should also board up your windows and doors with plywood, as it keeps glass from being blown into your home and causing cuts.
Jim Corkern is a writer and promoter of quality
flood water damage restoration chicago and other states such as
New Jersey mold remediation contractor companies across the united states.
How to Waterproof Your Deck
One thing that always makes a homeowner proud is a newly finished deck. And for a few months it may look very good. However, if you have not had your deck waterproofed, your deck could end up being a very ugly addition to your home. If you want your deck to be around for a long time, then waterproofing it is absolutely essential. Without waterproofing, than cracking and warping can occur, and that means your deck will not be very far from destruction. Fortunately, waterproofing doesn’t have to be very difficult.
The very first thing to do to waterproof your deck is to give it a very thorough cleaning. Now, usually the best time for one to start waterproofing the deck is to start right after you build the deck. However, cleaning it off is the first thing to do if you do not have the option of starting right away. You should start the cleaning process is to sweep off any and all debris that may be on the deck. Then remove any furniture that may be on the deck. Once all of the debris and furniture is removed, you can go to your local hardware store and purchase a cleaning solution. You can employ the use of a pump sprayer to apply the cleaning agent to the deck. It will eventually start to foam, and at that point you should start to scrub the deck with a scrub brush that has stiff bristles. The bristles will give a little extra muscle to remove any stubborn stains that may be left on there, especially ones from soot or grease. After scrubbing, rinse the deck off as thoroughly as possible with a garden hose. It’s a good idea to wear eye protection of some kind in order to keep any grit from the deck out of your eyes.
Now, after the deck has had time to dry, there are two options available. If the wood is more or less new, you have the option to put a new stain on it. If you do not want a new stain, then now is the time to apply water sealant onto the deck in order to protect the wood. Applying the sealant is best done with a sprayer or roller. The deck should dry completely after a few days, and then it should be alright to walk on it without worrying about damaging any of the sealant.
Jim Corkern is a writer and promoter of quality
Connecticut water damage restoration contractors and other states such as
North Carolina mold remediation contractor companies across the united states.
The very first thing to do to waterproof your deck is to give it a very thorough cleaning. Now, usually the best time for one to start waterproofing the deck is to start right after you build the deck. However, cleaning it off is the first thing to do if you do not have the option of starting right away. You should start the cleaning process is to sweep off any and all debris that may be on the deck. Then remove any furniture that may be on the deck. Once all of the debris and furniture is removed, you can go to your local hardware store and purchase a cleaning solution. You can employ the use of a pump sprayer to apply the cleaning agent to the deck. It will eventually start to foam, and at that point you should start to scrub the deck with a scrub brush that has stiff bristles. The bristles will give a little extra muscle to remove any stubborn stains that may be left on there, especially ones from soot or grease. After scrubbing, rinse the deck off as thoroughly as possible with a garden hose. It’s a good idea to wear eye protection of some kind in order to keep any grit from the deck out of your eyes.
Now, after the deck has had time to dry, there are two options available. If the wood is more or less new, you have the option to put a new stain on it. If you do not want a new stain, then now is the time to apply water sealant onto the deck in order to protect the wood. Applying the sealant is best done with a sprayer or roller. The deck should dry completely after a few days, and then it should be alright to walk on it without worrying about damaging any of the sealant.
Jim Corkern is a writer and promoter of quality
Connecticut water damage restoration contractors and other states such as
North Carolina mold remediation contractor companies across the united states.
Wednesday, September 19, 2007
Water Damage, Mold, and Mildew
One of the worst mistakes that a homeowner can make is ignoring the possibility of water damage to their home. While it may not seem like the steam in your bathroom from your showers or baths can do a lot of damage to the room, over time it can discolor the ceiling and eventually cause the drywall to sag down and possibly even collapse. You can imagine what kind of damage to the value of your home this can do and if you have purchased a home with water damage to the floors or ceiling, you know how much of a headache it can be to remodel it.
The answer to the steam problem is to install a simple exhaust vent in the ceiling over the tub or shower. This allows the steam to escape outside the room and the house and stops it from being absorbed by your ceiling drywall. You can often paint over the discoloration of the drywall after it has been damaged, but if the slab is sagging or cracked in the middle, it needs to be replaced as soon as possible. The last thing you want is for a loved one to be in the bath and the ceiling collapse on them.
Mold is also a threat to this and other moist rooms in the house. Mildew also tends to build up on tile and stone. Mildew and mold are close to the same thing, since they are both fungi, but mold tends to grow on more porous surfaces.
We have all heard horror stories of the bath tub or the toilet falling through the floor and unfortunately, most of the time this is due to the floor boards rotting. Too much water has soaked the floor over the years and has caused the boards to become flimsy. You can prevent this by making sure the floor of your bathroom is a hard, non-porous surface such as tile. The floor should be completely water tight and you may want to even install a drain on the bathroom floor, just to make sure the water goes where it is supposed to.
Even if you have a watertight floor, keeping the bathroom as dry as possible is a good idea. Always dry off the floor and other surfaces in the room after you get done with your shower. This helps lower the humidity in the room and ensures that the person who comes in the room after you does not slip and fall.
Jim Corkern is a writer and promoter of quality
North Carolina Mold Remediation and other states such as
New Jersey Sewage Damage Cleanup companies across the united states.
The answer to the steam problem is to install a simple exhaust vent in the ceiling over the tub or shower. This allows the steam to escape outside the room and the house and stops it from being absorbed by your ceiling drywall. You can often paint over the discoloration of the drywall after it has been damaged, but if the slab is sagging or cracked in the middle, it needs to be replaced as soon as possible. The last thing you want is for a loved one to be in the bath and the ceiling collapse on them.
Mold is also a threat to this and other moist rooms in the house. Mildew also tends to build up on tile and stone. Mildew and mold are close to the same thing, since they are both fungi, but mold tends to grow on more porous surfaces.
We have all heard horror stories of the bath tub or the toilet falling through the floor and unfortunately, most of the time this is due to the floor boards rotting. Too much water has soaked the floor over the years and has caused the boards to become flimsy. You can prevent this by making sure the floor of your bathroom is a hard, non-porous surface such as tile. The floor should be completely water tight and you may want to even install a drain on the bathroom floor, just to make sure the water goes where it is supposed to.
Even if you have a watertight floor, keeping the bathroom as dry as possible is a good idea. Always dry off the floor and other surfaces in the room after you get done with your shower. This helps lower the humidity in the room and ensures that the person who comes in the room after you does not slip and fall.
Jim Corkern is a writer and promoter of quality
North Carolina Mold Remediation and other states such as
New Jersey Sewage Damage Cleanup companies across the united states.
House Renavating Woes
Buying a new house can be a headache all by itself, but if you are wanting to purchase a fixer upper, then you have a lot more on your plate than most people do. House flipping is a popular way to make some quick money, but it is not usually as easy as television shows and magazines make it out to be. It is not only difficult because of the construction costs, but also because of the physical and emotional strength you have to have to get through the process. Carrying the loan or loans that you may have to get to be able to afford the property is something else. If you are unmarried and already have an apartment or mortgage to pay for, then carrying another mortgage until the home is fixed up and finally sold can be a little scary.
One thing that you need to be careful about if you are planning on renovating on a budget is taking on tasks that you have no experience in. You may be able to paint the interior on your own, but cutting your new granite countertops may be something you want to leave to the professionals. This can be very complicated and can most of the time only be done once. Mess up the granite slab and you will have to buy another to replace it and this can punch a huge hole in your budget. When in doubt, leave something to the professionals and do not cut corners by taking on projects you are not sure that you can do to professional quality.
Always check for water and mold damage to the property before signing any papers. You want to know just what you are getting yourself into and these two problems cropping up in the middle of your renovation can sink you further into debt than you intended to go. Repairing these problems can sometimes cost thousands of dollars and most of the time, mold cannot be gotten rid of without removing all of the building materials affected by it. It can be scrubbed off of drywall sometimes, but if the growth is heavy on the surface, you should throw it away instead. Cleaners cannot get into the porous drywall far enough to completely kill it and it will return.
The most moist areas of the home are often the most likely to be structurally damaged and there have been many stories of toilets and bath tubs falling through the floor due to rotted supports. This is usually because the floor has been soaked with water on a regular basis for a long time and unfortunately, this can be a real pain. If you are remodeling the floor with new tile, you may want to go ahead and check for this kind of damage underneath it, just to be sure you do not have to go back and do all this again.
Jim Corkern is a writer and promoter of quality
North Carolina Mold Remediation and other states such as
New Jersey Sewage Damage Cleanup companies across the united states.
One thing that you need to be careful about if you are planning on renovating on a budget is taking on tasks that you have no experience in. You may be able to paint the interior on your own, but cutting your new granite countertops may be something you want to leave to the professionals. This can be very complicated and can most of the time only be done once. Mess up the granite slab and you will have to buy another to replace it and this can punch a huge hole in your budget. When in doubt, leave something to the professionals and do not cut corners by taking on projects you are not sure that you can do to professional quality.
Always check for water and mold damage to the property before signing any papers. You want to know just what you are getting yourself into and these two problems cropping up in the middle of your renovation can sink you further into debt than you intended to go. Repairing these problems can sometimes cost thousands of dollars and most of the time, mold cannot be gotten rid of without removing all of the building materials affected by it. It can be scrubbed off of drywall sometimes, but if the growth is heavy on the surface, you should throw it away instead. Cleaners cannot get into the porous drywall far enough to completely kill it and it will return.
The most moist areas of the home are often the most likely to be structurally damaged and there have been many stories of toilets and bath tubs falling through the floor due to rotted supports. This is usually because the floor has been soaked with water on a regular basis for a long time and unfortunately, this can be a real pain. If you are remodeling the floor with new tile, you may want to go ahead and check for this kind of damage underneath it, just to be sure you do not have to go back and do all this again.
Jim Corkern is a writer and promoter of quality
North Carolina Mold Remediation and other states such as
New Jersey Sewage Damage Cleanup companies across the united states.
Getting Rid of the Mold
Even if you manage to kill the mold that exists in your house, your job is not over. When people discover there is mold in their homes, the first thing they usually want to know is the best way to kill it. This is the wrong way to approach the problem, because even though the mold is dead, it can still cause you health problems. The spores cannot cause yeast infections because they are dead and can no longer grow, but your body still recognizes them as something to be fought against, so you will experience allergy symptoms or even sometimes severe reactions to them. About one third of the population has mold allergies of some kind, so this is something that you want to consider.
Most of the time, removing the mold from the property completely is the only way to get rid of the allergy symptoms you or your loved ones may experience. This will probably mean opening up walls and removing drywall or even sometimes lumber from the home and replacing them with new material. You can sometimes wash mold off of the surface of drywall slabs, but if the growth is thick and heavily covers the surface, then it may be embedded into it and removal will be necessary. Mold killing chemicals cannot penetrate far enough into the drywall to kill the contamination and so it will only return, no matter how much scrubbing you do.
You can save clothes that have become molded sometimes, but unfortunately clothes that have been left molded for a long period of time can be so stained that it can never be taken out. Outside in the natural environment, the job of mold is to help with the decomposition of organic materials and it tends to do this fairly well, which is why you need to worry about it in your house. Lumber is organic, of course, and certain kinds of mold will cause it to rot completely.
Regularly check your house for water damage. If there is water damage, you can be sure that mold will start to grow there eventually if it is not taken care of. Moist areas in the home are the most at risk for mold growth and if you do not take care of them, you may end up having to do some heavy remodeling in the future to take care of the problem.
Jim Corkern is a writer and promoter of quality
Connecticut water damage restoration and other states such as
New Jersey Water Damage Restoration companies across the united states.
Most of the time, removing the mold from the property completely is the only way to get rid of the allergy symptoms you or your loved ones may experience. This will probably mean opening up walls and removing drywall or even sometimes lumber from the home and replacing them with new material. You can sometimes wash mold off of the surface of drywall slabs, but if the growth is thick and heavily covers the surface, then it may be embedded into it and removal will be necessary. Mold killing chemicals cannot penetrate far enough into the drywall to kill the contamination and so it will only return, no matter how much scrubbing you do.
You can save clothes that have become molded sometimes, but unfortunately clothes that have been left molded for a long period of time can be so stained that it can never be taken out. Outside in the natural environment, the job of mold is to help with the decomposition of organic materials and it tends to do this fairly well, which is why you need to worry about it in your house. Lumber is organic, of course, and certain kinds of mold will cause it to rot completely.
Regularly check your house for water damage. If there is water damage, you can be sure that mold will start to grow there eventually if it is not taken care of. Moist areas in the home are the most at risk for mold growth and if you do not take care of them, you may end up having to do some heavy remodeling in the future to take care of the problem.
Jim Corkern is a writer and promoter of quality
Connecticut water damage restoration and other states such as
New Jersey Water Damage Restoration companies across the united states.
Subscribe to:
Posts (Atom)
